ARS NB9M

Cleaning & Maintaining Collectible Radios


Improve and stabilize your collectible without a lot of work!



 Posted By: Bradley Stone (UncleBrad) on 07/04/2017

Care & Restoration 0 Comments 07/04/2017 

Cleaning & Maintaining Collectible Radios

If you have found a treasure in reasonably good cosmetic condition, there is process to improve and stabilize it without a lot of work.

Before you begin, ensure you have the best panels and other parts for your radios.  I use the best covers, knobs, meters and other components from donor rigs all the time.

 The fundamentals are the same as detailing automobiles; even the products used are the same.

What You Will Need

  1. Air compressor w/extended blow nozzle accessory
  2. Simple Green solution
  3. Several microfiber cloths
  4. Soft, authentic, good-quality sponge
  5. Toothbrush
  6. Hobby brushes
  7. 000 steel wool
  8. Meguiars Cleaner Wax
  9. Meguiars Quick Detailer
  10. Lemon Pledge
  11. PlastX Polishing Compound
  12. Goo Gone
  13. Machining oil
  14. DeOxit
  15. Ultrasonic Cleaner

Steps

  1. Remove the radio from the case.  Using the blow nozzle, carefully use compressed air on most surfaces.  Stay away from speakers and delicate components.  Do not spray inside IF cans.  You can destroy a speaker very quickly using compressed air!  The idea is to remove potentially abrasive dirt before washing.
  2. Prepare a bucket of soapy water.  Any dishwashing liquid will do, but Dawn works best for the greasy, oily surfaces.
  3. Pull out all the tubes and/or removable boards.
  4. Spray the Simple Green solution on the chassis, about 6" square.  Using a toothbrush and hobby brushes, clean the area.  Progress to other areas.  Wrap a microfiber towel around the handle of your toothbrush and dry the areas as you clean them, carefully working around IF cans, variable caps, etc.
  5. On corroded chassis areas, such as the exposed metal backside, use 000 steel wool with a little machining oil and gently rub out if possible, using a circular motion.
  6. Use de-oxit on the tube sockets, wafer switches, slide and potentiometers.
  7. If the knobs are dirty, remove them and place in an ultrasonic cleaner for about 45 minutes with water and a bit of dishwashing soap. 
  8. Clean the line cord with the Simple Green solution and working it through a microfiber cloth.
  9. Using a soft, authentic, good-quality sponge, liberally apply the soapy water on the front panel and scrub with the soft sponge.  In very dirty areas, gently use a toothbrush.  Avoid getting water in meter movements.  Allow to dry in the open sun.
  10. Use Goo Gone and your fingernail for any old, dried adhesives found.  You will NOT scratch or damage the surface as long as you use your fingernail and invest some time.
  11. If the front panel surface is faded, and the paint is not chalky or damaged, test a small portion with cleaner wax to see if the surface shines up.  If so, carefully use cleaner wax. Skip this step if the front panel is in good shape.
  12. If the knobs are off, put them back on the radio.  You can use the toothbrush to clean the indicator markings.
  13. Spray about a 6" square portion of the front panel with  Meguiars Quick Detailer.  Do not substitute with another brand!
  14. Using a dry, clean microfiber cloth, quickly and gently buff the area.  This product can be used on any surface; no need to avoid plastics.  In fact, the knobs will shine up nicely with Quick Detailer.  Move on to other areas with the Quick Detailer until the front panel is finished.
  15. Lubricate any bearings with the machining oil.
  16. Reassemble the radio.
  17. Polish the case with Lemon Pledge and a microfiber cloth.  Lemon Pledge works on ANYTHING - metal, plastic, or wood.  It will help protect even the chassis.
  18. Remove and polish meter plastic covers with PlastX if necessary, using the instructions provided on the bottle.  Re-install.

Description Comment  
Process in the MS Word Format (.docx format)

   

Nets
Posted: 01/20/2020
Comments: 0
Favorite VHF Nets

VHF NetsNet NameDayTimeFREQ/ModeEast Central Indiana 6M NetSunday8 PM EST50.140 MHz /USB...  READ MORE

Friends
Posted: 10/27/2019
Comments: 0
K5LYN's SB-10/Collins 310B/DX-60 Experiment

Below is a picture of my latest project.  After doing the transceiver thing, with a CE20A, mated to a SX-115, then the next transceiver project, a 10A mated to any Drake R4 series receiver, I had an idea.  Those transceiver projects have a lot of oscillators, and even the crystal oscillators can drift as they warm up, which requires re-zeroing the transmitter to the receiver from time to...  READ MORE

Nets
Posted: 08/29/2019
Comments: 0
Favorite HF Nets

All times are in Eastern unless otherwise indicated.  Frequencies are in Megacycles. Recommended HF NetsNet NameDayTimeFREQ/ModeSwan Technical NetWednesday2200 UTC14.2925 +/-  /USB3938 Traders NetWednesday8 PM3.938 / LSBBoatanchor NetWednesday7:30 PM CST3.870 / LSBWA9ZTY Vintage AM GroupSaturday7:30 AM3.885 / AMMidwest Classic Radio NetSaturday8:30 AM3.885 / AMSwan Technical NetSatu...  READ MORE

Vintage Manufacturers
Posted: 04/30/2019
Comments: 0
W1LSB Finds an EBay Treasure

I was first licensed as a novice in 1958, and the WRL catalog was really dominant in those days, with the Globe King, Globe Champ,  and all of the lesser models gracing its pages.  I had a Globe Chief 90 and often dreamed of owning the bigger iron in those pages.   I have since collected most of the WRL catalogs from 1954 to 1964, and the last one turned out to be an interestin...  READ MORE

Crazy EBay Prices!
Posted: 03/22/2019
Comments: 0
Crazy EBay Prices!

Below are some screen shots of incredible prices demanded by some EBay vendors.  Since posting an auction is free as long as the item is not sold, it costs nothing for the unscrupulous vendor to display their (unremarkable/filthy/nicotine-caked) wares as if they were priceless artifacts of distinction, having immense value.  It is truly within this online marketplace where prod...  READ MORE

The Radio Shack
Posted: 12/21/2018
Comments: 0
Swan Twins: 600-T, 600-R Custom, 600-S

These excellent examples of the Swan Twins are from the estate of John Thuren, AA5T (SK) of Houston, Texas.  John had checked in to the 20M Swan net with these very desirable "big Swans" until a few years ago. A big thanks to Eddie, NU5K, who handled John's estate and placed these on EBay.  He packed them well, knowing they are indeed an important find. ...  READ MORE

SDR for Vintage Radios
Posted: 08/09/2018
Comments: 1
SDR techniques for Boatanchor Radios

W9RAN started playing with RTL-SDR dongles about 6 years ago, and knew they were going to have a big impact on the radio hobby.   But since these $15 receivers only tuned the VHF and UHF bands, he designed a wideband upconverter to make HF coverage possible, and described how it worked in an article in Jan. 2013 QST "Cheap and Easy SDR".   The "RANVerter" as...  READ MORE

Activities
Posted: 03/04/2018
Comments: 0
2018 Cave City Hamfest

Barry, AC9NK and I attendended the 2018 Cave City hamfest, which was awesome this year.  The facility was packed, with lots of vendors.  We enjoyed the company of my friend Tom, N4LID for dinner the night before. Tom, who is blind, had not been able to get to the hamfest for many years.  You will find more pictures at the Kentucky Phone Net site.  A big thanks to Rod, N4ZIF, fo...  READ MORE

Vintage Manufacturers
Posted: 02/22/2018
Comments: 0
Remembering the Electra Company

For nearly five years, spanning 1978 - 1983,  I worked as an Electronics Technician in the original Bearcat manufacturing and service facility in Cumberland, Indiana.  Electra was one of the best places I've ever worked, and were among the many innovative consumer electronics companies which sprang up in and around Indianapolis.  Al Lovell, a former employee of Regency (also in ...  READ MORE

Care & Restoration
Posted: 02/08/2018
Comments: 0
Heath Tube-Type LMO Repair (PDF)

The tube-type Linear Master Oscillators (“LMO”) used in the Heathkit SB-Line equipment is a very stable and accurate means of controlling the frequency in the equipment. Unfortunately, as the units age, many LMOs develop a “warble” when tuning. This “warble” usually stops when the frequency control knob is not rotated. However, accurately “zero-beating&rdq...  READ MORE